END STOP BUMPER

Part # RP-023G(F)
Part # RP-023G(T)

Plastic bumper.
Included hardware:
1/2"-13UNC bolt, nut and lockwasher.
Included.

FESTOON STACK SECTION

Part #RP-024G

19" length. Stores festoon trolleys or gliders without taking away from the available track length. Stack sections are painted blue.
Length (L) 19"
Weight 20 lbs
Price includes attachment hardware and one bolt for end stop bumper.
(shorter lengths available)

FESTOON GLIDER

Part #RP-018G

Included. Plastic glider. One included for every 6 feet of runway.
A = 2" dia
F = 3-1/2"

SLOPED CEILING MOUNTED HANGER ASSEMBLY

Part #SP-028G

Mounted to I-Beam.For Plain Steel Track, Hangers are painted blue.
Rod Length 0"20" 72"
Height (H) Min. 11-3/8"
Weight 29 lbs 32 lbs 41 lbs
Rods are 5/8" diameter. B7 Alloy-all thread

CURVED TRACK

Part #RP-016G

This is a one piece 90 degree angle curve.
Radius is 31’-3/8”.
x = Length 45”
Weight 53 lbs

SPLICE JOINT (with hardware)

Part #SP-020G

Needed to join monorail track if span is longer than 23 feet.
B (maximum) 3-3/4”
D 8”
Weight 9 lbs

THREADED RODS (1/2” diameter)

Part #SP-021

Fully threaded rods can be cut to any length; cutting charges apply. May be obtained locally.

METAL FRAMING CHANNEL (Unistrut)

Part #SP-022

To be used when mounting track in the same direction as the ceiling joists. This channel is mounted at a right angle to the ceiling joist to disperse the weight load. Available in 10 foot sections. May be obtained locally.

SWAY BRACE FITTING

Part #SP-013G

These clamps facilitate sway bracing by using 1" o.d. standard pipe (listed below). Clamps have a 5/8" mounting hole and a black zinc finish.

SWAY BRACE PIPE

Part #SP-013G/P

10'6" lengths, Unpainted steel.
Length 10'-6" 21'-0"
Weight 18 lbs 35 lbs

Joist Clamp

Part #SP-012

Height of clamp 8"
Size of joist 2"
Size of bolt holes 7/16"
Bottom hole 9/16"

"V" Clamp

Part #SP-013

End holes 7/16" diameter
Hole centers 4 1/2"
Center holes 9/16" diameter

"U" Clip

Part #SP-014

End holes 7/16" diameter
Hole centers 3 3/4"
Center hole 9/16" diameter
Drop 2 3/16"

"L" Clip

Part #SP-015

Supporting holes 7/16" diameter
Hole centers 3"
Center hole in clip for suspension bolt 9/16" diameter

Double Bracket Plate

Part #SP-016

Holes in both horizontal and bent sides 9/16" diameter

Single Bracket Plate

Part #SP-017

Holes in both horizontal and bent sides 9/16" diameter

"C" Clamp

Part #SP-018

Bottom rod diameter 1/2". Maximum flange thickness 3/4". Hardened steel cup point set screw diameter 3/8". Work load limit 540 lbs. Used with "I"-beams, channels, and wide flange beams. Support rod is threaded into bottom tapped hole.